Black with Slate can have a fantastic effect on a single wall. It is close to Black with Black, but is not as harsh. Black with Slate is also a great colour shade for shutters or front doors.
Note on colour representation
There may be deviations in the colour representation on your screen. If you have any questions, please contact our customer advisory service directly via +49 941 206 068 20 or WhatsApp, or for a real representation of the colours use our colour cards.
Black with Slate | Matt Varnish 2.5L
Black with Slate can have a fantastic effect on a single wall. It is close to Black with Black, but is not as harsh. Black with Slate is also a great colour shade for shutters or front doors.
€95.00
Available, delivery time: 2 to 4 Working days
⭐️ Very popular colour: Bought over 1150 times during the last weeks
High quality paints
Individual color consultation
Safe DHL Delivery
This is what our customers say
The ideal matt lacquer for a noble look
MissPompadour Black with Slate
The velvety surface you achieve with Matt Varnish makes every piece of furniture appear in a particularly noble light. This matt lacquer reflects light in a special way. A coat of Matt Varnish always looks extraordinarily high-quality and aesthetic.
Low odour & drip-free
Do you need to mask and cover the whole flat as a first step in painting or paint the whole outside? Nope - with our low-odour and splash-proof varnishesn you can paint on the side and without spilling on floors and furniture. That means "just paint".
Hard-wearing varnish
The Matt Varnish MissPompadour Black with Slate varnish is a hard-wearing varnish that can be used anywhere in the house. Of course, it can be cleaned with a damp cloth.
Water-based & environmentally friendly
All our varnishes are water-based and contain the lowest possible amount of VOCs. What's more, our products are made in Europe. Learn more about the sustainability of Matt Varnish here.
For a wide range of substrates
With Matt Varnish, you can paint wood, veneer, plastic, metal, painted and unpainted surfaces, for example. Sometimes a primer is necessary.
What you can paint with Matt Varnish
Ideal for your vintage & used look
MissPompadour Black with Slate
Black with Slate is an almost, but only almost black colour shade. The deep anthracite does not look as harsh as pure black. The colour shade is ideal for painting window frames, a front door or a garage door. Black with Slate can also have a very elegant effect on furniture. This shade of black is particularly popular on kitchen furniture.
As a wall paint, Black with Slate looks more refined and subtle than Black with Black. The colour shade is ideal for creating an accent wall. This deep, velvety colour shade makes classic and modern art stand out particularly well. However, gold and silver tones also go wonderfully with this dark wall paint.
MissPompadour Matt Varnish for your project
Velvety look for noble surfaces
MissPompadour Black with Slate Matt Varnish lays softly on the surface. With this acrylic varnish, you can create a completely matt look that is downright velvety. Matt Varnish is particularly suitable as a wood varnish for cupboards and chests of drawers, i.e. all interior furniture that is not subject to constant wear.
If you want to give your Matt Varnish additional protection, use our colourless MissPompadour To Wax Polish. A thin layer of wax makes your surfaces easier to care for with a sophisticated shimmer. Or use our MissPompadour To Seal for extra impact protection. Note, however, that an additional topcoat will make the Matt Varnish furniture lacquer appear slightly glossier.
Matt Varnish for Vintage Look
Do you want to paint furniture with a vintage look? Then Matt Varnish MissPompadour Black with Slate is the perfect varnish quality for your project. The dull finish of this furniture lacquer is reminiscent of old times. The matt varnish is also suitable for tone-in-tone painting, where you paint a piece of furniture in the same colour as the wall behind it. This makes particularly bulky furniture look less conspicuous. But Matt Varnish is not only used as a varnish for wood, but also for metal.
Matt Varnish for radiators
You can also create a great effect by painting a radiator in the same colour shade as the wall behind it. This makes the radiator disappear into the wall. Here, the heat-resistant Matt Varnish acrylic paint is ideal, because its surface structure is similar to that of our quality The Valuable Wall Paint.
MissPompadour Matt Varnish: Harmful to aquatic life with long lasting effects. Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol-3-one (3:1), 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. If medical advice is needed, have product container or label at hand. Keep out of reach of children. Use only outdoors or in a well-ventilated area. Avoid release to the environment. Wear protective gloves/eye protection. Dispose of contents/container in accordance with local/regional/national/international regulations. EU limit value for this product (cat. A/d): 130 g/l (2010). This product contains max. 130 g/l VOC.
Manufacturer/Responsible person:
MissPompadour GmbH
Am Reitfeld 10, 93161 Sinzing, Germany
service@misspompadour.com
+49 941 206 068 20
* Country-specific requirements: France
Securely packed
Our parcels are often very heavy and need to be well padded. With our many years of experience, we pack your products safely and well protected with paper in cardboard so that the paints and wallpapers arrive at your home intact.
Shipping costs
The shipping costs for deliveries within Germany and to Austria are 4.90 euros per order. Information on deliveries to other EU countries and Switzerland can be found in our shipping conditions. We ship with DHL GoGreen shipping.
Fast delivery with DHL
Thanks to its many locations and fast processing, DHL makes it possible for your order to arrive within 1-2 working days of dispatch. So your project can start soon!
Returns
Sometimes it happens that the colour is more plentiful than you thought. If you have unopened tins that you want to send back to us, simply contact our customer service team within 14 days of receiving the goods. Please note that you will be responsible for the return costs, as we try to minimise returns for reasons of sustainability.
Water-based
All our colours, varnishes and additional products are water-based. For you, this means that you can easily wash them off your hands, brushes and rollers with water.
Minimal VOC content
For a stable paint and varnish finish, you don't have to use paints with solvents that are harmful to the environment and your health. Apply our paints without additional protective measures - because while the varnishes contain the lowest possible amount of VOCs, our wall paints are even VOC-free.
Suitable for toys
Our paints and varnishes are characterised by their safety for children. Paint your child's room, kitchen, rocking horse or children's furniture with them, as they do not release any toxic substances when they come into contact with saliva.
DHL GoGreen shipping
We ship with DHL GoGreen. This means that DHL ensures that theCO2 emissions generated are offset. This is done via various climate protection projects and enables you and us to have climate-neutral shipping.
| Eggshell Varnish: | MissPompadour Eggshell Varnish is a silky matt, slightly shimmering varnish with convincing coverage and high durability. It is suitable for finishing tiles, metal, stone, plastics and of course wood indoors and outdoors. Eggshell Varnish produces a smooth, easy-to-clean surface that is pleasant to the touch. Eggshell Varnish appears a little brighter than Matt Varnish due to its smooth surface and stronger reflection of light. Preparation and use: Stir the varnish well and apply at temperatures above 7 °C. Pre-treat raw iron and rusty metal (sand off rusty spots) with rust protection primer and then prime with To Bond & Block. Remove flaking old paint or sand the substrate. The substrate must be free of dust and grease. If the substrate is bleeding or stained, prime with MissPompadour Stainblock To Bond & Block. Use the fine MissPompadour brush or a varnish roller. Spraying is possible after diluting with a little water Range: 1L Eggshell Varnish is enough for approx. 10 m2 of painting with a double coat. Coverage and range depend on the condition of the substrate Drying time: Dust-dry after 0.5 hours - recoatable after 4-5 hours - cured after approx. 14 days Shelf life: At 5-25 °C approx. 2-3 years, store frost-free and tightly closed Thinning: Our varnish is ready to use. On highly absorbent substrates or at higher temperatures, the varnish can be diluted with max. 10 % water for a priming coat. When using a paint sprayer, also dilute with max. 10 % water. |
|---|---|
| Matt Varnish: | MissPompadour Matt Varnish is a completely matt varnish paint with excellent covering power. It is suitable for working on wood, metal, stone, painted and unpainted surfaces when an absolutely gloss-free surface is to be achieved. With this acrylic varnish you get a powdery-velvety surface with a very noble effect, which gives every colour shade a tremendous depth. Preparation and application: Stir varnish well and apply at temperatures of 7 °C and above. Pre-treat raw iron and rusty metal (sand off rusty spots) with rust protection primer and then prime with To Bond & Block. Remove flaking old paint or sand the substrate. The substrate must be free of dust and grease. If the substrate is bleeding or stained, prime with MissPompadour Stainblock To Bond & Block. Use the fine MissPompadour brush or a varnish roller. Spraying is possible after diluting with a little water Range: 1L Matt Varnish is sufficient for approx. 8 m2 with a double coat. Coverage and range depend on the substrate condition Drying time: Dust-dry after approx. 1 hour. Can be recoated after 4-5 hours - cured after approx. 14 days Shelf life: At 5-25 °C approx. 2-3 years, store frost-free and tightly closed. Thinning: Our varnish is ready to use. On highly absorbent substrates or at higher temperatures, the varnish can be diluted with max. 10 % water for a priming coat. When using a paint sprayer, also dilute with max. 10 % water. |
| Technische Informationen - Sanft & Matt Lack: | |
| The Functional Wall Paint: | MissPompadour The Functional Wall Paint is our matt, extremely hard-wearing wall paint. This diffusion-open paint with acrylate-based binders resembles a latex paint. It is wet washable and resistant to wet abrasion (class 1). Surfaces painted with it are resistant to water-soluble cleaning agents and disinfectants. The Functional Wall Paint is easy to apply and VOC-free. However, its fantastic colour brilliance is particularly impressive. You can also easily paint over it again. With this paint, extremely stressed walls can be attractively designed in both private and professional areas. Preparation and application: Stir the paint well and apply at temperatures of 8 °C and above. Apply the paint to plaster and textured wallpaper with a Roller and brush. Spraying is possible after diluting with max. 10 % water. In any case, apply 2 coats of paint so that it can fully develop its covering power. Range: 1L The Functional Wall Paint is sufficient for approx. 7-9 m2 with a double coat. Coverage and range depend on the surface condition. Drying time: Dust-dry after 1 hour - recoatable after 6 hours. Can be firmly wiped off after approx. 28 days. Shelf life: At 5-25 °C approx. 2-3 years, store frost-free and well closed. Thinning: Our paint is ready to use. On highly absorbent substrates, the paint can be diluted with max. 10 % water for a primer coat. When using a paint sprayer, also dilute with max. 10 % water. |
| The Valuable Wall Paint: | MissPompadour The Valuable Wall Paint is our super precious, sustainable premium wall paint. It gives your walls a beautiful dull matte and deep finish that makes every colour shade shine intensely. The Valuable Wall Paint has a perfect viscosity, so you can apply it easily. This diffusion-open paint has an extremely high opacity (opacity class 1) and is even scrub-resistant. Like all MissPompadour Paints, it is water-based and contains renewable raw materials from nature during its lifetime. Preparation and application: Stir paint well and apply at temperatures from 8 °C. On plaster and textured wallpapers, apply the paint with Rollers and brushes. Spraying is possible after diluting with max. 10 % water. In any case, apply 2 coats of paint so that it can fully develop its velvety effect Coverage : 1L The Valuable Wall Paint is sufficient for approx. 6-9 m2 of paint when applied twice. Coverage and range depend on the substrate condition Drying time: "Hand dry" after 0.5 hours - Can be painted over after 4 hours. Can be wiped off with a damp cloth after 28 days. Shelf life: At 5-25 °C approx. 2-3 years, store frost-free and well closed. Thinning: Our paint is ready to use. On highly absorbent substrates, the paint can be diluted with max. 10 % water for a primer coat. When using a paint sprayer, also dilute with max. 10 % water. |
| Brightness: | Dark |
| Intensity: | Gentle |
Questions & Answers
How do I use Matt Varnish?
Stir the varnish carefully after opening the tin so that the pigments are evenly distributed. Then pour some of the varnish into a paint tray. Now apply the varnish evenly and not too thickly using a brush or varnish roller. For large surfaces such as wooden ceilings, you can also work with a paint sprayer. Dilute the varnish with a maximum of 10 % water.
Leave the varnish to dry for approx. 4 hours or overnight. Then apply a second coat of paint. We recommend that you always apply 2 coats, even if the varnish covers the first time. This makes the colour layer thicker and longer-lasting! The varnish layer is still somewhat sensitive in the first few days. After approx. 14 days, the varnish is hardened and resilient.
Tip: Wrap the paint tray, varnish brush and Roller in cling film during the drying break. This will keep everything moist until the second coat.
When do I need to prime or seal Matt Varnish?
In most cases, you can achieve a perfect result with MissPompadour Black with Slate as a matt varnish alone - without priming or sealing. You can usually simply paint over old paintwork without sanding if the old layers of paint are still sufficiently stable.
However, priming is sometimes necessary. To Block & Bond- MissPompadour Primer is perfect for many surfaces. Use it to prime stained, discoloured wood or wood with lots of knotholes to create an even base for the Matt Varnish. It provides stainblock protection against bleeding wood.
If you want to paint very smooth surfaces made of glass, tiles or plastic, we recommend a primer coat of To Bond & Block so that your paint holds better.
You should also prime metal paintworkif the metal is unpainted or the varnish has flaked off. If it is raw iron or rusty metal, use a rust protection primer before priming.
For additional stabilisation of the surface, you can apply a thin layer of MissPompadour To Wax-Polish or MissPompadour To Seal at the end.What tools do I need to apply the varnish?
Of course, you need the right tools for a good work result. That's why we've put together a selection of high-quality tools for you. From masking tape with natural rubber to our environmentally friendly paint trays without any plastic to the paint roller and our pink MissPompadour paint brushes - we have everything you need to make your painting projects easy. :)
Content: 0.375 Litre (€47.73* / 1 Litre)
Mix & Match
These colours match wonderfully
Mix & Match
These colours match wonderfully
